The green wire of the 4-way connector you sent in a picture of is the right turn/stop circuit, the yellow is left turn/stop, brown is running light, and white is ground. You could use the # 18252 to easily splice into the circuits as well to make an additional connector. view full answer...
You will have no problem using your Curt Echo Wireless Brake Controller item # C51180 when you lose cell signal. The wireless functions are controlled by Bluetooth. Bluetooth does not require a carrier signal or Wi-Fi to function. view full answer...
The Stabil-Step Stabilizer Jack # JSS-7 would just be placed under your step. You can use the holes you are looking at to mount this to a board for extra stability if you would like. Attached is a picture that a customer sent in where they mounted a board to the bottom for a greater surface area. view full answer...
What you can do is get the TireMinder i10 TPMS for RVs - LCD Monitor - Signal Booster - 4 External Tire Sensors # TM89FR and then also order 3 of the part # TM-2ALUM which comes with 2 of the aluminum tire sensors. This will give you the 6 aluminum plus 4 brass sensors you need for your application. view full answer...
The purple wire on the Replacement Control Module for Lippert Electric Coach Step # LC301702 is intended to connect to the positive power wire for the coach's porch light, so it comes on when the step is activated. Unfortunately neither I nor my contact at Lippert has any way to look up that wire color for your 2011 Tiffin Allegro.
If you have a circuit tester like # PTW2992 you can try testing the wires on the coach until you find the one that delivers power to the porch light.
In a... view full answer...